Commercial & Industrial Epoxy Floor Coatings in West Odessa TX - a coating that stays put
Coating peeling in the forklift lanes or going soft where spills land? We prep the slab right and fit the system to your work.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
What goes into a commercial epoxy floor in West Odessa?
A commercial or industrial epoxy floor in West Odessa is a coating system built in layers over your concrete: a primer, the epoxy, an aggregate and a topcoat. Together they give a shop, warehouse or business a floor that holds up to traffic and chemicals.
You're probably here because the floor you have is wearing through, peeling or soaking up whatever drips on it, and you can't close the building for long. The price mostly turns on the floor's size, how much prep the slab needs, such as grinding, crack repair or stripping an old coating, and which system and topcoat your work calls for. The schedule turns on how long you can close the space and how long the topcoat needs before it takes traffic. The estimate I write spells out the prep, each coat and anything that isn't included.
How do you know your commercial floor coating is failing?
Peeling in the traffic lanes
You see the coating flaking or worn to bare concrete where forklifts and carts run every day. That usually means the system was too thin for the traffic or nobody ground the slab before it went down. The longer those bare spots sit, the more oil they soak up and the harder they are to prep.
Bubbles or hollow blisters
Raised spots that sound hollow or pop when you press them usually mean moisture or contamination under the coating pushed it off the slab. Patching them rarely holds, because whatever lifted the first spot keeps working on the rest of the floor.
Soft, dull spots near spills
When the floor goes soft, dull or discolored where fuel, chemicals or cleaners land, the coating isn't standing up to what hits it. Left alone, those spots open up and let spills reach the concrete underneath.
How we install commercial and industrial epoxy floor coatings
We start by asking what hits your floor every day and how long you can close the space, because chemicals, temperature swings, traffic and impact, cleaning needs and your shutdown window all decide which system and topcoat fit. I'd rather match the floor to the work than sell one system to everybody. Once the system is picked, we check the slab for moisture the way that system calls for, grind the concrete so the coating has something to grab and fill the cracks. Then we lay the primer, the epoxy, the aggregate and the topcoat. Most of the bad floors I've torn out failed because nobody ground or checked the concrete first, so we don't skip that part.
If you want your home garage done to the same standard, our garage floor coatings get the same grinding and checks. When a shop can't stay closed long, we often look at polyaspartic floor coatings, since a polyaspartic topcoat gets back into service faster than a standard one.
Smooth finish
This suits dry warehouses, showrooms and stockrooms where you want a floor that sweeps and mops clean fast. It's slicker when wet, so we don't recommend it where water or oil sits on the floor.
Textured aggregate finish
This suits wash bays, kitchens, shops and any floor that gets wet or greasy, because the aggregate gives boots and tires grip. It takes more scrubbing to keep clean, and I'd make that trade on any wet floor.
Get a written estimate for your shop or warehouse floor
We respond within one business day to set a time. I'll come out, look at the slab and write a free estimate at your property, and you're under no obligation to go ahead.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens when you call about a commercial epoxy floor in West Odessa?
Here's how a commercial floor job goes from your first call to the final walkthrough, so you can plan around the time the space is closed.
Call or send a message
Tell us the floor size, how the space gets used and how long it can close. We'll get back to you and set a time to come look.
I look at your slab
I come out myself, check the concrete and ask how you use the space. The estimate spells out the prep, each coat and anything that isn't included, so you know exactly what you're paying for.
Our crew lays the floor
Our own crew does the prep and every coat. Before we pack up, I walk the finished floor with you.
Why West Odessa business owners call Stonebridge Epoxy Floors for commercial floors
The owner looks at your slab
I drive out to your shop or warehouse around West Odessa myself and look at the concrete before I write a number down. Our own crew does the work, so the people on your floor are people I answer for.
Doing the prep right since 2013
I spent years doing upkeep for a property management company, tearing up floors somebody else had rushed, and I started this business in 2013 to do the prep right the first time. That's why I'll tell you when a cheap fix won't hold instead of selling it to you.
Licensed and fully insured
We're licensed and fully insured. If your landlord or property manager wants proof on file, ask before we start and we'll send it over.
On a commercial floor, the system has to match what hits it, and the prep has to be done before anything goes on top. Send us your floor size and how long you can close, or call (432) 280-0038.
Commercial floor permits and shop jobs around West Odessa
Ector County Development Services handles the permits required for developments. Its list names development structures, drive approaches, septic, right-of-way and cell towers, but not floor coatings. That list doesn't settle whether your floor job needs a permit, and depending on your address, a different office may cover your property. If a permit question comes up, we help you figure out which office covers your address and help with the paperwork when one is needed. The county takes permit submissions online and answers questions at 432-498-4241.
We're based in West Odessa and work across Ector County and the cities around it. A lot of the shop and warehouse slabs we look at have oil soaked in and an old coating or two to grind off. We see the same on jobs in Odessa and Midland, so we figure that prep in before we quote.
Questions about commercial epoxy floors in West Odessa
How do I choose between epoxy and urethane for a commercial floor?
Lean toward epoxy where chemicals hit the floor and toward urethane where temperatures swing. Epoxy brings durability and chemical resistance, while urethane flexes more and handles thermal shock better. Conventional epoxy may also not be the strongest pick for repeated steam or hot-water washdowns, continuous sunlight or a slab that moves a lot, so I'll ask about all of that when I look at your floor.
How long does a commercial epoxy floor keep my business closed?
Mostly as long as the topcoat needs. One commercial cost guide says a polyaspartic topcoat allows forklifts in 24 to 48 hours, while a standard urethane topcoat needs 3 to 5 days before heavy loads. The same guide puts a standard system on a 5,000 square foot floor at two to four days of work plus cure time. We pick the topcoat to fit how long you can close, and the estimate shows which one we're using.
Why does a concrete slab need a moisture test if it looks dry?
A slab can feel dry to the touch and still hold enough moisture inside to lift a coating within months. The test comes after the system is chosen and follows that system's method, because a reading that's fine for one floor can fail another. A good test records where the readings were taken and what they showed, so ask any installer, us included, for those records.
Is commercial epoxy flooring subject to Texas sales tax?
Texas Comptroller guidance says the total charge for remodeling, repairing or restoring nonresidential property, such as warehouses, retail shops and restaurants, is taxable. The same guidance says construction labor isn't taxable on contracts for building new structures, completing unfinished ones or initial finish-out. Check with your tax adviser to see how your own job is classified.
What does commercial epoxy flooring cost in West Odessa?
Prep is usually the biggest swing in the price, because a clean, sound slab costs far less to get ready than one with an old coating to strip, cracks to fill or oil soaked in. After that, the system's thickness, the aggregate, the topcoat and whether we work in phases around your business all move the number. The estimate lists each of those so you can see where the money goes.
What should a commercial epoxy floor bid include?
It should name the type of epoxy, how thick it goes on, the primer under it, and the aggregate and topcoat over it, not just the word "epoxy." Two bids that both say epoxy can be very different floors. Ours spells out the prep, each coat and anything that isn't included, so you can compare it line by line with anyone else's.
Related floor coatings for shops and homes
Garage Floor Coatings
If your home garage floor is stained or peeling, we coat it with the same grinding and moisture checks we use on commercial slabs.
Polyaspartic Floor Coatings
When your shop, showroom or bay can only close for a short stretch, a polyaspartic coating cures fast enough to get people and equipment back on sooner.
Service areas for commercial epoxy floors
Stonebridge Epoxy Floors of West Odessa is based in West Odessa, TX, and coats commercial floors across Ector County and the cities around it. Five cities have their own page here, including Andrews and Monahans, and we work beyond them too.
Odessa, TX
Get your commercial floor looked at
Call (432) 280-0038 or use the form, and have your floor size, how the space gets used and how long it can close ready, so I can come out ready to talk about systems.