Concrete Resurfacing & Overlays in West Odessa TX - a new surface on sound concrete
Worn, flaking or pitted concrete can often take a new surface without a tear-out, as long as the slab underneath is still sound.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
Can my old concrete be resurfaced instead of torn out?
Concrete resurfacing in West Odessa puts a new layer over your existing slab, so a worn driveway, patio, walkway or garage floor can work like new again without breaking it out and pouring from scratch.
The bad news first. An overlay is only as good as the concrete under it, and if the old slab has loose spots, a new layer just covers a problem that'll work its way back through. What moves the price is how much loose concrete has to come off, how much grinding and repair the slab needs, and how big the area is. The schedule turns on that same prep, plus whatever repair turns up once the loose spots are opened. Your estimate spells out the prep, each coat and anything that isn't included, so you can see where the money goes before you decide.
How do you know your concrete is ready for a new surface?
Surface flaking off in chips
The top of the slab is coming off in thin chips or patches, often near edges or where you park. That usually means the surface layer has come loose, and the longer it goes, the more of it lifts and the bigger the repair gets.
Rough, pitted, worn-down concrete
The surface feels sandy or is full of small pits, but the slab itself isn't moving or breaking up. That's often a good candidate for a new surface, and waiting mostly means more dust and more grinding before we can lay anything down.
Old coating peeling up
Paint or an old coating is lifting off the concrete in sheets or bubbles. It usually went down without proper prep, and every bit of it has to come off before a new layer has anything solid to grab.
Cracks that keep spreading
Cracks keep widening, or old patches are breaking up around their edges. That can point to trouble below the surface, and an overlay won't fix a slab that's moving, so have it looked at before you pick a fix.
How we handle concrete resurfacing and overlays
First I check the slab for loose spots, because an overlay only works on concrete that's sound underneath. If yours isn't, I'll tell you it needs repair instead, even when that's not the answer you were hoping for. When it's a good fit, our crew takes out anything loose, grinds and cleans the old surface so the new layer bonds to it, fills and repairs what needs it, then lays the overlay and finishes it.
Some floors call for a different fix. If an inside floor is out of level or has low spots, self-leveling concrete and overlays can flatten it before anything else goes down. Concrete around a pool is its own job, and we handle it under pool deck coatings and resurfacing because a deck takes pool water and bare feet every day.
Patch the loose spots
This suits a slab where the trouble is in a few areas and the rest is solid. We cut out the loose layer, clean what's under it and patch, which keeps the job smaller.
Grind and overlay the whole slab
This suits concrete that's worn or loose across most of the surface but sound underneath. Grinding the whole slab gives the new layer an even surface to bond to from edge to edge.
Repair or replace instead
This is for a slab that's broken, settling or loose too deep to cover. I'd rather tell you that at the estimate than put a new surface on it and watch it come apart.
Get a written resurfacing estimate for your slab
We respond within 1 business day to set a time. I come out, look over the concrete and write a free estimate at your property, and it's obligation-free.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens when you call about resurfacing in West Odessa?
Here's how a resurfacing job runs from your first call to the final walk-through, and who you'll be dealing with at each step.
Call or send a message
Call (432) 280-0038 or use the form, and we get back to you to set a time to come out. It helps to have photos of the slab, its rough size and any hollow or flaking spots ready.
I look at the slab myself
I come out, check the concrete, ask how you use the space and write an estimate that spells out the prep, each coat and anything that isn't included. You'll know what you're paying for before you decide anything.
Our crew preps and resurfaces
Our own crew does the work, starting with the prep, since that's what holds the new layer down. If we find more loose concrete once the surface is open, we stop and show you before going further.
We walk the floor together
I walk the finished surface with you before we pack up, so anything you want looked at gets looked at while we're still there. The work is backed by our satisfaction guarantee.
Why West Odessa owners call us to resurface concrete
Prep first, since 2013
I started this business in 2013 after years of tearing out floors somebody else had rushed. Most of those failed because nobody ground or checked the concrete first, so that's where every one of our jobs starts.
Our own crew does the work
The people grinding and laying your overlay work for us, not for somebody we hired that week. You're not handed off to a stranger once the estimate is signed.
Licensed and fully insured
We're licensed and fully insured. That's the first thing to check with anyone running a grinder on your concrete, so ask us about it at the estimate.
Based in West Odessa
We're based here and work across Ector County and the cities around it, including Odessa, Midland, Andrews and Monahans. That's the concrete we look at every week, from garage slabs to driveways off county roads.
If you're not sure your slab is solid enough for a new surface, that's what the visit is for. Request an estimate or call (432) 280-0038.
Concrete resurfacing and driveway work in West Odessa
Here it's Ector County Development Services that takes permits online, including for work within a county road right-of-way. Its list names drive approaches, the stretch of driveway that meets the road, and doesn't name resurfacing, so that list doesn't settle whether your job needs a permit. The county office helps with its online portal at 432-498-4241, and that's the call to make about your address. If your work does include a drive approach, the permit makes sure the driveway connects properly to the county road, and it takes a preliminary inspection and a second one once the forms are set. When a permit question comes up, we help you figure out which office covers your address and help with the paperwork when one is needed.
Most of what we resurface out here is garage slabs, patios and older driveways that have worn down or had a coating fail. We see the same mix on jobs in Odessa and Midland, and we check every one the same way before anything goes on top.
Questions about concrete resurfacing in West Odessa
Is my concrete a good fit for an overlay?
It is if the existing slab is in good condition, because a bonded overlay ties directly to the old concrete and only holds as well as what it's tied to. That guidance comes from studies of road pavement, but the same logic carries over to a driveway, patio or walkway. If the slab is loose across most of its surface or breaking up, an overlay is the wrong fix.
How do I tell if my concrete surface is loose?
Tap the slab with a hammer and listen, because a hollow sound points to a loose layer below the surface. Solid concrete gives a sharp, ringing sound. Mark the hollow spots with chalk so I can see how far they spread when I come out.
What causes a concrete overlay to peel or flake off?
Poor bond between the old and new layers is the usual cause, and it leads to delamination, where the top layer separates, or spalling, where the surface breaks away. Rust on steel bars near the surface can also make the top layer come loose. Ask any crew which prep method they plan and why it suits your slab, since each method has its own strengths and limits.
How much does concrete resurfacing cost in West Odessa?
We price it slab by slab after I've seen it, because the biggest swing is whether you need a few patches or a full grind and overlay. Patching a few loose areas keeps the job small, while loosening across the whole slab means grinding all of it and covering it with a new surface. Your estimate breaks out the prep and each coat, so you can see which part costs what.
Who handles permits for concrete work in West Odessa?
Ector County does, because West Odessa is an unincorporated community in Ector County on the west side of the city of Odessa. The county office, what its list covers and how we help are in the permit section above.
Does Ector County charge for a driveway connection permit?
No, Ector County charges no fee for drive approach or right-of-way permits. The two inspections described above still apply, so plan time for them if your job includes the approach.
Related concrete services for floors and pool decks
Self-Leveling Concrete & Overlays
Pick this when an indoor slab runs uneven or sloped, because a flat base keeps a coating or new floor from showing every dip and ridge.
Pool Deck Coatings & Resurfacing
For pool concrete that's faded, rough on bare feet or flaking, since a deck takes pool water and steady foot traffic every day of the season.
Service areas for concrete resurfacing near West Odessa
Stonebridge Epoxy Floors of West Odessa is based in West Odessa, TX, and we resurface concrete across Ector County and the cities around it. The five cities below have their own pages, including Odessa and Andrews, and they aren't the only places we work.
Odessa, TX
Get your slab checked before you resurface
Loose concrete found before an overlay is a patch, and found after it means tearing out the new surface too.