Flooring Contractor in Midland, TX - Garage and Shop Floors That Stay Put
Stonebridge Epoxy Floors of West Odessa is a West Odessa, TX flooring contractor that grinds, coats, polishes and seals concrete floors in Midland, TX, from home garages and pool decks to shops and storefronts.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
Midland homes and shops, from the floor up
Midland is a short drive east of us, and the calls we get there look a lot like the ones at home in West Odessa and up in Andrews. Homeowners want a garage they can keep clean, landlords want a floor that gets through the next tenant, and oilfield service companies want a shop floor that doesn't come up under their trucks.
Much of the city is single-story homes on slab foundations, with older ranch houses in the established neighborhoods, newer builds on the city's edges, and offices, storefronts and metal shop buildings mixed in. Older garage slabs usually carry years of oil, patched cracks and a coat of paint or sealer that has to be ground off before anything new will hold. Newer slabs are cleaner, but they often have a slick, hard finish, and that still has to be opened up with a grinder so a coating can grip it.
Flooring services we offer Midland homes and businesses
Epoxy Floor Coatings
Fits Midland garages and workrooms on plain gray slab, once we grind the concrete open so the epoxy grips instead of sitting on dust.
Commercial & Industrial Epoxy Floor Coatings
For oilfield service shops, warehouses and bays in Midland where trucks, forklifts and spilled fluids wear through thin coatings, we build thicker systems on ground concrete.
Garage Floor Coatings
Midland garages get hot tires, oil drips and caliche dust. A floor coated on ground concrete wipes clean and holds up under parked trucks.
Polyaspartic Floor Coatings
A faster-curing coating that handles West Texas sun better than plain epoxy, so it suits garages with the door open all afternoon and covered patios.
Metallic Epoxy Flooring
For a Midland game room, office or showroom where you want a glossy, marbled look on the slab instead of carpet or tile.
Urethane Cement Flooring
Built for commercial kitchens, food prep rooms and wash bays in Midland businesses that see hot water, steam cleaning and spills that would soften a regular epoxy.
Polished Concrete Flooring
Good for Midland storefronts, offices and open-plan homes where you'd rather keep the slab itself, ground down and polished, than cover it with something that wears through.
Stained Concrete Flooring
Adds color to plain concrete in Midland living areas, patios and shops, as long as old sealer and glue come off first so the stain can soak in.
Terrazzo Flooring
For Midland lobbies, offices and entryways that take heavy foot traffic and need a hard, polished floor that cleans up with a mop.
Basement Flooring
Basements are rare in Midland, so when your house has one, we check the slab for moisture before picking a coating, because damp concrete pushes coatings off.
Concrete Grinding & Surface Preparation
The step under every floor we coat in Midland. We grind off sealer, paint and the smooth top layer so the new floor has something to grab.
Concrete Sealing
Keeps oil, dust and water from soaking into bare concrete in Midland garages, shops and patios when you want the slab protected without a full coating.
Concrete Resurfacing & Overlays
For worn, pitted or patched Midland slabs that are still sound underneath. We tell you first if the concrete is too far gone for an overlay to hold.
Self-Leveling Concrete & Overlays
Flattens low spots on uneven older Midland slabs before new flooring or a coating goes down, so you don't end up with puddles or rocking shelves.
Pool Deck Coatings & Resurfacing
Midland pool decks bake in the sun and stay wet around the edges. We resurface them with a textured finish that gives bare feet better grip.
Concrete Floor Stripping & Removal
When an old Midland garage coating is peeling or a glued-down floor has to go, we take it down to bare concrete before anything new goes on.
Get a written floor estimate for your Midland property
Send the form and we'll get back to you within one business day. The estimate is free, done at your property, and you're under no obligation to go ahead.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What working in Midland means for permits and price
Permits in Midland come from the city's Code Administration, which issues residential building permits for new construction, additions, remodeling and repairs, and the city says most construction projects need one. The permit has to be pulled by the owner or by a licensed and bonded contractor representing the owner, and when a job needs one, work can't start until it's issued, so it can move your start date. Contractors who build or renovate in Midland also have to register with the city, so ask anyone you're thinking of hiring whether they are. Floor coatings aren't named on the city's permit list, so we don't guess. If a permit question comes up on your job, we help you figure out which office covers your address and help with the paperwork when one is needed. We're licensed and fully insured.
Your address matters too. Homes outside city limits, out in Midland County, get driveway permits from the county's Public Works office instead of the city, which counts if your job takes in the driveway. Price here turns on the same things it does in Odessa, mostly how much prep the slab needs and which system you pick. The schedule turns on any permit, how much grinding and repair the concrete takes and how long each coat has to cure before the next one goes on. Your estimate spells out the prep, each coat and what's not included, so you can see where the money goes.
What wears down Midland garage and shop floors
Heat and sun come first. A Midland garage with the door up on a summer afternoon gets hot, plain epoxy that sits in direct sunlight tends to yellow over time, and hot tires pull at any coating that never bonded to the slab. We grind the concrete so the coating bonds into it, and where sun hits the floor or a pool deck, we usually steer you toward a polyaspartic top that holds its color better.
Then there's hard use. Plenty of Midland floors carry work trucks, trailers and equipment that drip oil and drag in grit, and a coating meant for a home garage won't hold up to that, so on shop floors we put down a thicker system and say up front if the slab needs repair first.
What happens when you call us about a Midland floor
Here's how a job runs from your first call to the final walk-through, so you know who you'll talk to and what you'll get in writing.
Call or send the form
Call (432) 280-0038 or send the form with a few lines about the space and what's on the floor now. We set a time for me to come out, and it helps if you're there.
I look at your slab
I come out myself, check the concrete for cracks, old coatings and moisture, and ask how you use the space. You get a written estimate that spells out the prep, each coat and anything that isn't included, so you know what you're paying for.
Our crew does the work
Our own crew does the grinding, repairs and coats, starting once any permit your job needs has been issued. We tell you ahead of time which days the space is off limits while the coats go down and cure.
We walk the floor together
Before we pack up, I walk the finished floor with you and go over when it's ready for foot traffic and vehicles. The job is backed by our satisfaction guarantee.
Flooring contractor questions from Midland homeowners
Does my floor remodel need a permit in Midland, TX?
It might, so check before work starts instead of assuming you're clear. The city issues residential permits for remodeling and repairs, among other work, and says most construction projects need one, though floor coatings aren't named by name. You can apply online through PermitMidland, and if your job needs a permit, we'll help with the paperwork.
When does a building permit expire in Midland?
A Midland permit expires on its own if work doesn't start within 180 days of the issue date, or if work stops for more than 180 days in a row. Once it lapses you need a new application. To ask for an extension, call the city at 432-685-7390.
Does a flooring contractor need to register with the City of Midland?
Yes, contractors who build or renovate property in Midland have to register with the city. Before any permits are issued, the contractor has to provide a $10,000 bond approved by the City Attorney, and that bond is good for 2 years.
How much does an epoxy garage floor cost in Midland, TX?
There's no honest number until the slab's been seen, because prep often costs more than whatever goes on top. A floor that's never been coated and only needs grinding comes in lower than one with peeling paint to strip, oil to clean out and cracks to fill, and a full flake or metallic system costs more than a clear sealer. I'd rather price the prep right than sell you a cheap coat that lifts in a year.
What causes garage floor epoxy to peel in West Texas?
Most peeling comes from poor prep, usually a coating rolled onto concrete that was never ground, so it sat on dust, old sealer or a slick top layer instead of biting into the slab. Hot tires then pull it up where you park. We grind and check the floor before anything goes on it.
How do I know if my Midland slab is too far gone to coat?
Wide or shifting cracks, crumbling spots and moisture coming up through the concrete are the usual warning signs. Some of that can be repaired or covered with an overlay, and some needs more than a coating can fix. I check for all of it on the estimate visit and tell you straight if a cheap fix won't hold.
Other areas we serve
Odessa, TX
Tell us about your Midland floor
Call (432) 280-0038 or send the form with what the space is used for and what's on the floor now, so I show up knowing what to check.