Flooring Contractor in Andrews, TX - Garage and Shop Floors Built on Proper Prep
Stonebridge Epoxy Floors of West Odessa is a flooring contractor that coats, polishes and repairs concrete floors in Andrews, TX. We work on garages, metal shops, rentals and business floors, and we grind each slab so the coating stays put.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
Garage and shop slabs we see in Andrews
Andrews is a smaller, spread-out city north of us. Most of the floors we're called to there sit in a two-car garage, a metal shop building out back or a work bay in town. Homeowners want a garage they can hose out. Landlords want a rental floor that survives the next tenant, and business owners want a shop floor that doesn't dust up or stain. It's the same mix we see in Monahans, and we bring the same crew and grinders up from West Odessa.
A lot of these slabs were poured years ago and sealed once or never, and they've soaked up oil and fine sand ever since. That decides the job more than the coating does, because a coating only holds if we grind down to clean, open concrete and check for cracks and moisture first.
Floor work we do for Andrews homes and shops
Epoxy Floor Coatings
A good fit for Andrews garages and workrooms on older slabs. We grind the concrete open first, then build the epoxy coats so they bond instead of peeling.
Commercial & Industrial Epoxy Floor Coatings
For shop bays, warehouses and service businesses in Andrews that see forklifts, trucks and spilled fluids. We pick a thicker system and plan the work around your hours.
Garage Floor Coatings
Garages here pick up oil drips, blown-in sand and hot tires. A coated floor sweeps clean and keeps the concrete from dusting under your feet.
Polyaspartic Floor Coatings
When you can't give up the garage or shop for long, polyaspartic cures faster than epoxy and handles the summer sun better at an open door.
Metallic Epoxy Flooring
For a showroom, office or finished room where you want a floor with depth and movement. It needs a flat, sound slab, so we check that first.
Urethane Cement Flooring
For shops and work areas that see hot wash water, chemicals or heavy hits. It takes more abuse than epoxy, and it handles damp concrete better.
Polished Concrete Flooring
If your Andrews shop or store slab is in decent shape, we can grind and polish it instead of coating it. There's nothing on top to peel.
Stained Concrete Flooring
A way to give a patio, porch or plain interior slab some color without a thick coating. Stain soaks in, so old sealers have to come off first.
Terrazzo Flooring
For a lobby, entry or commercial space that takes heavy foot traffic and has to look sharp. It's a bigger job, so we plan the layout with you.
Basement Flooring
For a basement, cellar or any below-grade room. We test the slab for moisture first, because water pushing up from below is what lifts coatings there.
Concrete Grinding & Surface Preparation
Our coatings in Andrews start here. Grinding opens up sealed, oily or smooth-troweled concrete so whatever goes on top has something to grab.
Concrete Sealing
For driveways, patios and garage floors you want protected without a full coating. A penetrating sealer helps the concrete shed oil stains and stop dusting.
Concrete Resurfacing & Overlays
When an older slab in Andrews is pitted, scaled or patched but still solid underneath. An overlay gives you a new wearing surface without tearing out the concrete.
Self-Leveling Concrete & Overlays
For floors that dip where an addition meets the old slab. It fills the low spots so tile, vinyl or a coating can go down flat.
Pool Deck Coatings & Resurfacing
Pool decks in Andrews take hard sun and get hot underfoot. We resurface or coat them with a textured finish that's easier on bare feet.
Concrete Floor Stripping & Removal
If a coating someone else put down is peeling or bubbling, it has to come off. We grind it back to clean concrete before anything new goes on.
Get a free floor estimate at your Andrews property
We get back to you within one business day to set a visit. I look at the slab myself and write a free estimate covering the prep, each coat and what's not included, with no obligation.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
Working in Andrews: permits, licenses and what sets the price
Whether a floor job in Andrews needs a permit is the City of Andrews' call. I won't guess at it for a coating, so we ask before work starts. If one's needed, your start date waits on it, and we help you figure out which office covers your address and help with the paperwork. The city keeps its rules on permit fees, bonds and insurance in force, and we're licensed and fully insured. If your job brings in an electrician or an air conditioning contractor, check their state license before they start.
We do the same floors in Odessa and Midland, so an Andrews job gets the same grinders, the same crew and the same prep, just a longer drive. The price and the schedule both turn mostly on how much prep your slab needs and which system you pick, plus the weather on cure days, and the estimate gives you your own number.
Why Andrews garage and shop floors wear out
Fine sand blows into every garage and shop out here. Tires and boots grind it into bare concrete until the surface dusts and pits. Oil and drips from trucks soak in on top of that, and a soaked slab won't hold a coating, so we grind and clean it until we're back to concrete the coating can bite into. Where the slab is in decent shape, polishing or sealing can be the better call than a coating, and I'll tell you if that's the case.
Summer heat is the other problem. A cheap kit coating softens under hot tires and lifts off in patches. For a garage that sees a hot truck every evening, we usually steer people toward polyaspartic or a thicker epoxy system over a properly ground slab.
What happens when you call us about an Andrews floor
Here's how a job runs from your first call to the final walk-through, so you know who you'll talk to and what you'll get in writing.
Call us or send a message
Call (432) 280-0038 or use the form, and tell us a little about the floor. We get back to you and set a time to come out.
I look at your slab
I come out myself, check the concrete for cracks, oil and old coatings, and ask how you use the space, so it helps if you're there. The estimate lists the prep, each coat and anything not included, so there's no guessing about what you're paying for.
Our crew does the work
Our own crew does the grinding, the repairs and the coats. If the city needs a permit for your job, we start once it's in hand.
We walk the floor together
Before we pack up, I walk the finished floor with you and go over anything you want to look at. The job is backed by our satisfaction guarantee.
Questions about hiring a flooring contractor in Andrews
What building codes does Andrews, TX use?
The City of Andrews adopts the International Building, Residential and Existing Building Codes by reference, along with the fire, plumbing, fuel gas, mechanical and swimming pool codes and the national electric code. By reference means they count as if they were written into the city's ordinance word for word, along with any amendments. The city's ordinance names the 2015 editions, so if the edition matters for your job, ask the city which ones apply now.
Who enforces building codes in Andrews, TX?
The city's Building Official enforces the codes Andrews has adopted. Breaking the city's code ordinance is a misdemeanor, with a fine of up to $2,000, which is one more reason to settle any permit question before the floor goes down. If you need a place to start, a city notice lists the City Manager's office at (432) 523-4820.
How do I check a contractor's license in Texas?
Use the TDLR license search, which shows whether a person or business holds a current license from that state agency. TDLR licenses trades such as electricians and air conditioning contractors, so it's the place to look up anyone in those trades before they start work at your house.
How much does an epoxy garage floor cost in Andrews, TX?
You get a written number after I've seen the slab, because the condition of the concrete moves the price more than the coating does. A clean, sound slab costs less to prep than one that's oil-soaked, cracked or carrying an old coating that has to be ground off. A full flake or polyaspartic system costs more than a basic epoxy coat, and the size of the floor matters too.
What causes epoxy to peel off a garage floor in West Texas?
Poor prep causes most of it. A coating rolled onto concrete that wasn't ground or cleaned sits on dirt, oil and old sealer instead of bonding, and then moisture coming up through the slab or hot tires pull it loose. Most of the failed floors I've torn out went that way, so we grind and check the slab before anything goes on it.
How long does a garage floor coating take to cure before I can park on it?
Polyaspartic usually lets you back on the floor sooner than epoxy, and we tell you the wait for your system before the job starts. Temperature changes it too, so a coating sets faster in an Andrews summer and takes longer on a cold day. Before we leave, we tell you when it's ready for foot traffic and when you can drive on it.
Other areas we serve
Odessa, TX
Have us look at your Andrews slab
Call (432) 280-0038 or send a message, because knowing what your slab needs before you buy a kit can save you from grinding off a failed coating later.