Epoxy Floor Coatings in West Odessa TX - a floor coating that stays stuck down
Peeling, stained or dusty concrete? We grind and prime the slab first, so the epoxy and topcoat bond and hold up.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
What does an epoxy floor coating involve in West Odessa?
An epoxy floor coating in West Odessa, TX is a layered finish built on your concrete, where the slab gets ground and primed, the epoxy goes on with color flakes scattered across the wet coat, and a topcoat seals it so it stands up to tires, oil and foot traffic.
At Stonebridge Epoxy Floors of West Odessa, most calls come from people across Ector County whose bare concrete is dusting and staining, or whose last coating is already lifting. The bad news first. A coat that was rolled onto unground concrete usually has to come off before anything new will stick, and that's its own job under concrete floor stripping and removal. The price moves with the size of the floor, how much grinding, crack repair or removal the slab needs, and which topcoat you pick. The schedule turns on that same prep and on how long you can keep cars and people off the floor while it cures. Your estimate puts a real number on your own floor.
How do you know your concrete floor needs an epoxy coating?
An old coating peeling up
If the coat on your floor is lifting in flakes or sheets, it usually never bonded to the concrete in the first place. The longer you drive on it, the more it lets go, and all of it has to come off before a new coat will hold.
Oil soaking into concrete
Dark spots that won't scrub out mean bare concrete is soaking up oil and fluids like a sponge. Every stain that sets in deep is more grinding later, so coating it sooner saves you prep.
Gray dust everywhere
If you're sweeping fine gray dust off the floor and tracking it into the house, the top of the concrete is wearing away. A coated floor stops that, and waiting just lets the surface get rougher and more pitted.
How we put down an epoxy floor coating
We clear the floor and grind the whole surface with diamond tooling, because the primer needs open, rough concrete to soak into. Cracks and chipped spots get filled and ground flush so they don't show through the finish. Then the primer goes down, then the epoxy coat with flakes broadcast in by hand if you've picked a flake finish, and last the topcoat, which is the layer that takes the scuffs and spills. The coating is only as good as the concrete under it, so if you ask me for a quick roll-on job with no grinding, I'll tell you it won't hold and we won't do it.
On a house, most of what we coat falls under garage floor coatings, where the finish has to handle tires, tools and whatever drips off the truck. Shops, warehouses and other business floors get our commercial and industrial epoxy floor coatings, built for forklifts, chemicals and daily cleaning.
Flake finish
Color flakes scattered into the epoxy give a speckled floor that hides dust and tire marks and adds some grip underfoot. Most homeowners pick this for a garage.
Solid color coat
A single color with no flakes suits a shop or workspace where you want to spot a dropped bolt fast. We can add a fine grit to the topcoat so it isn't slick when it's wet.
Get a written estimate for your epoxy floor
Send the form and we'll get back to you within one business day. The estimate is free, done at your property and comes with no obligation, and it lists the prep, each coat and what's not included.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens when you call us about an epoxy floor in West Odessa?
Here's how a job runs from your first call to the final walkthrough, and who you'll be dealing with at each step.
Call or send a message
Call (432) 280-0038 or use the form, and we'll get back to you to set a time for me to see the floor. Tell us whether it's a garage, a shop or a business floor, since that shapes the system.
I come look at the slab
I come out myself, look over the concrete and ask how you use the space, what you park, spill or roll across it. Then I write an estimate that spells out the prep, each coat and anything that isn't included, so there's no guessing what the price covers.
Our crew preps and coats
Our own crew grinds, primes, coats and topcoats the floor in that order. Before we start, we'll tell you how long to keep people and cars off it.
Walk the finished floor together
Before we pack up, I walk the floor with you and go over how to care for it. If something doesn't look right to you, that's the time to say so.
Why West Odessa owners call Stonebridge for epoxy floors
The owner writes your estimate
I come out myself to look at your slab, whether it's in West Odessa or elsewhere in Ector County, and our own crew does the work. You won't hear one thing from a salesman and get something else from the crew.
Prep-first floors since 2013
I started this business in 2013 after years of tearing out rushed floors for a property management company. That's where I learned floors fail from the bottom up, so grinding gets the most attention on our jobs.
Licensed and fully insured on site
We're licensed and fully insured. That matters when a crew is running grinders and coatings in your garage or business, because you shouldn't be the one carrying the risk.
On an epoxy floor, the parts you can't see once it's done, the grinding and the primer, decide how long it lasts. Send us a message and I'll come take a look at your slab.
Epoxy, garage and shop floors around West Odessa
One Texas flooring guide warns that a one-day, roll-on epoxy with no grinding can look great for a season and then peel from hot-tire pickup, which is when tires come in hot off a Texas summer road, soften the coating and pull it up. On a garage floor that takes cars every day, that's why grinding and priming are part of our plan from the first visit, not an add-on. We see the same failed coatings on jobs in Odessa and Midland, and nearly all of them let go at the bond, not on top.
Sun is the other thing. The same guide notes that polyaspartic and polyurea topcoats hold up to Texas UV and cure faster, though they cost more, so on a garage where the door stays open to the afternoon sun, or when you need the floor back sooner, I'll usually point you to a polyaspartic topcoat.
Questions about epoxy floor coatings in West Odessa
How much does an epoxy floor cost around Odessa, TX?
Epoxy floor coating in nearby Odessa usually costs about $3 to $11 per square foot. That's the going range in the area, not our price, and where your floor lands in it depends mostly on how much grinding and repair the slab needs and which topcoat goes on. I'd rather price yours after I've seen it.
What causes an epoxy garage floor to peel?
Usually it's prep, a coat that went onto concrete nobody ground or checked first. Without grinding, the epoxy sits on a smooth, dusty top layer instead of biting into the slab, and that's how most of the bad floors I've torn out failed.
How long does an epoxy floor last?
One Texas guide says a properly ground, primed, broadcast and topcoated system lasts 10 to 20 years. That's the guide's figure for a full system, not a promise from us, and it's a long way from the single season a no-prep roll-on coat can give. Our work is backed by our satisfaction guarantee.
Is labor on a home floor job taxed in Texas?
The Texas Comptroller says labor to repair, remodel or restore residential real property isn't taxable. That's the state's general rule for home jobs, so ask me how it applies to your quote when I'm out to look at the floor.
How do I compare epoxy floor quotes?
Check whether each quote includes grinding, a primer, a broadcast layer and a topcoat, because those steps together make up the system that lasts. A lower number that skips the grinding usually isn't the same floor, and ours lists each step so you can line them up.
Can you put epoxy over an old peeling coating?
No, not if you want it to hold. The loose coating has to come off and the concrete has to be ground clean first, because new epoxy is only as strong as whatever it's stuck to.
Related services for garage and shop floors
Garage Floor Coatings
If your garage slab is dusty, oil-stained or shedding an old coat, this is the flake system most homeowners pick for parking, storage and a workbench.
Commercial & Industrial Epoxy Floor Coatings
For a shop, warehouse or business floor that takes forklifts, spilled fluids and daily cleaning, this is the heavier system built to handle that abuse.
Service areas around West Odessa, TX
Stonebridge Epoxy Floors of West Odessa is based in West Odessa, TX, and we coat floors across Ector County and the cities around it. Below are 5 areas with their own page, including Andrews and Monahans, and we work in other places nearby too.
Odessa, TX
Get your epoxy floor estimate on the calendar
Measure the floor and think about what you park or store on it before you call (432) 280-0038 or use the form, because that's what decides the prep and the topcoat I'll recommend.