Polyaspartic Floor Coatings in West Odessa TX - a garage floor you can use sooner
Peeling coating, oil stains or a dusty bare slab? We grind it, repair it and coat it so your garage floor stays stuck down.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
Is a polyaspartic coating worth it for your garage floor?
Polyaspartic floor coatings in West Odessa, TX, are a tough type of polyurea finish we put over a ground and repaired garage or shop slab, and most people pick it to get their garage back sooner, though how soon depends on the product and the time of year.
Maybe the old paint is lifting where your tires sit, or you're tired of a bare slab that soaks up every drip, and you don't want to be redoing the floor in a few years. Here's the bad news first. A coating is only as good as the concrete under it, so the price moves mostly with the prep, which comes down to how big the floor is, how much grinding and crack repair it needs, whether an old coating or sealer has to come off, and the finish you pick. The schedule turns on that same prep plus the cure, which runs longer when it's cold. My estimate lists the prep, each coat and anything that isn't included, and if you're still comparing systems, our garage floor coatings page covers the other options.
How do you know your garage floor is ready for a new coating?
Coating peeling under tires
Flakes lifting where you park usually mean the last coating went down over concrete nobody ground, or over an old sealer it couldn't grab. The longer you wait, the more water and oil get under the loose edges, and the more there is to grind off later.
Old floor turning yellow
An older epoxy floor that's gone amber near the garage door is usually breaking down in the sun. It's mostly cosmetic at first, but as it wears thin and chalky there's more old coating to strip before anything new can go down.
Stains and dust on bare concrete
A bare slab sheds dust you track into the house and soaks up oil and coolant wherever they land. Every year you wait, those stains sink deeper, and getting them out is part of the prep a coating needs to stick.
How we put down a polyaspartic floor coating
We start by checking the slab, because most of the failed floors I've torn out failed at the concrete, not the coating. Then we grind the surface instead of acid etching it, take off any old coating or sealer and repair the cracks, since the polyaspartic makers' sheets call for clean, dry, sound concrete prepped that way before anything goes down. Next comes the base coat, because one maker's sheet says that as a general rule polyaspartic shouldn't go straight onto bare concrete. The polyaspartic goes on last, and that's the layer that won't yellow or fade, even in a garage that gets a lot of sun.
Polyaspartic isn't the right answer for every floor. If you want deep, swirled color for a game room or showroom, metallic epoxy flooring is the system for that look. If a shop floor sees hot water, strong cleaners or big temperature swings, urethane cement flooring usually holds up better than a thin coating, and I'll tell you so at the estimate.
Flake finish for most garages
Colored chips go into the base coat and get locked under the clear polyaspartic, which hides dust and small marks and gives shoes and tires some grip. It suits a family garage that sees cars, bikes and muddy boots.
Solid color for shops and work bays
One color with no chips is easier to sweep and makes a dropped bolt easy to spot. It suits a shop where you're on your knees, rolling a creeper or cleaning up after a project.
Get a written estimate for your polyaspartic garage floor
We respond within 1 business day to set up a visit. I come look at the slab and write the estimate at your property, and it's free and obligation-free.
(432) 280-0038- Based in
- Odessa, TX 79764
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call us about a polyaspartic floor?
Here's how it goes from your first call to the day you park on the new floor, and who you'll be dealing with at each step.
Call or send us a message
Call (432) 280-0038 or use the form, and we'll get back to you to set a time to look at the floor. It helps to tell us the garage size in square feet and whether there's an old coating or cracks.
I come look at the slab
I come out myself, check the concrete and ask how you use the space, then write an estimate that spells out the prep, each coat and anything that isn't included. You see where the price comes from before you agree to anything.
Our crew coats, then we walk it
Our own crew does the grinding, repairs, base coat and polyaspartic. Before we pack up, I walk the finished floor with you and go over when you can walk and park on it.
Why West Odessa homeowners call Stonebridge Epoxy Floors for polyaspartic
I come out and quote it
I look at the slab, ask how you use the garage and write the estimate myself. You deal with the same person from the first look to the final walk-through, so you're not explaining your floor to someone new halfway through.
Prep-first floors since 2013
I started this business in 2013 after years of upkeep work for a property management company, tearing up floors somebody else had rushed. Thirteen years in, I'd still rather tell you a cheap fix won't hold than sell it to you.
Based here in West Odessa
We're based in West Odessa, the unincorporated part of Ector County on the west side of the city of Odessa. When you have a question about your floor down the road, you're calling someone close by.
Licensed and fully insured
We're licensed and fully insured. That matters when a crew is running grinders and mixing coatings inside your garage.
If your garage has an old coating, cracks or a stain you can't get out, tell us about it and I'll come take a look.
Polyaspartic and garage floor work around West Odessa
A news report described West Odessa as having no city council and no city zoning laws. On jobs out here we coat plenty of attached garages, but also a lot of detached shops, and those slabs have usually seen years of oil, equipment and patch jobs, so they take more grinding and repair before the base coat. I look for that at the estimate so it's priced in up front, not found halfway through the job.
We work across Ector County and the cities around it, and we see the same kind of tired garage slabs on jobs in Odessa and Midland. The prep doesn't change with the address.
Questions about polyaspartic floors in West Odessa
How much does a polyaspartic garage floor cost in West Odessa?
Polyaspartic or polyurea garage floor coating usually costs about $6 to $10 per square foot across the US, and that's the market's range, not our price. It runs higher per square foot than epoxy, and where your floor lands depends mostly on how much grinding, crack repair and old-coating removal the slab needs. I'll give you your own number after I've seen the slab.
How long does a polyaspartic floor take to cure before I can park on it?
It depends on the product and the season. One guide puts cars back on the floor within 24 hours, while one maker's sheet says to wait at least 3 days in summer and a week in winter. We tell you which product we're using and talk through the real wait for the time of year before we start.
How long does polyaspartic last compared with epoxy?
A professionally installed polyaspartic or polyurea system lasts 10 to 20 years or more with little upkeep, while epoxy typically lasts 5 to 10. That longer life is what you're paying for with the higher price per square foot, and it only holds if the slab underneath was prepped right.
What causes a polyaspartic garage floor to blister or peel?
Moisture coming up through the slab is one cause. One maker warns that a slab without an effective moisture barrier can pass moisture up and make the coating blister and fail, and that maker puts moisture testing on the installer. That's why we check the slab before anything goes down, and if it isn't a good candidate, I'll tell you.
How soon can I walk on a new polyaspartic garage floor?
One guide says a polyaspartic floor can take foot traffic 4 to 6 hours after it's installed, and parking takes longer, as covered above. While it's going down, the safety sheet for one product's unmixed part warns that breathing it can cause allergy or asthma symptoms or breathing trouble. We'll go over how long your household should stay out of the space for the product we're using.
Can a polyaspartic floor be put down in cold weather?
Usually, as long as conditions stay within the product's range. One maker's sheet calls for air between 40°F and 90°F while it's applied and curing, over a slab that isn't damp. I'll go over the timing for the time of year at the estimate.
Other floor systems for garages and shops
Metallic Epoxy Flooring
A good fit for a garage gym, game room or showroom, where you want a poured, marbled color that nobody else on the street has.
Urethane Cement Flooring
Worth a look for wash bays, kitchens and work areas that see standing water, spills and daily scrubbing, because it's troweled on thick instead of rolled thin.
Service areas near our West Odessa base
Stonebridge Epoxy Floors of West Odessa is based in West Odessa, TX. We put down polyaspartic floors in the 5 cities listed here, including Andrews and Monahans, and they aren't the only places we work.
Odessa, TX
Get your polyaspartic garage floor estimate
The sooner I see your slab, the sooner we can plan the coating around the weather it needs to cure.